Rear suspension

I’m putting my rear suspension back together on my 2003 Tacoma. The torque specs I found are 115 ft lbs for the front mount and 67 ft lbs for the rear shackles. Also 90 ft lbs for the U-bolts and 53 ft lbs for the shock mounts. Just wondering are all these torque specs correct? And should I use threadlocker on any of the bolts?

 

Close enough !

Thread Locker your call .I have never torqued any of the bolts since in the seventies.

Here all that hardware gets cut off so I don`t never seize any of the bolts but the shocks.

 

4WD:
Front Hanger: 116 ft lbs
Shackle: 67 ft lbs
U Bolts: 90 ft lbs
Shocks: 53 ft lbs (I'd suggest being careful on this one- stripping these would suck)

I use (a very small dab) anti-seize on all of these.