What Have You Done To Your 3rd Gen Today?

Ive replaced my windshield 2 times now. They seem to crack easy when hit with a stone or pebble.

 

New tail lights!

 

Yeah, I should have just quoted the section of the post regarding LEDs in the 3rd gen to be concise. Folks might read the first bit and not the rest.

 

The final pieces for my Christmas upgrades arrived today.
Once the weather is warm out I will be adding an AuxBeam controller, new honeycomb style grill, BAMF behind the grill light mount, and these two massive Prowlr off-road lights from Backwoods Adventure (they were on sale for half-off so why not.)

 

Yes, just to clarify this was my experience as well with a stock truck with one tire size up. Pant leg dragging or rubbing getting in and out as I don't and can't use it as a step. Not a deal breaker either. the Pros outweigh the cons for me. I like to keep my truck protected and these offer that. I first saw these mentioned in a Tacoma review on YT (After 6 months of ownership, 2018 Toyota Tacoma TRD Pro Review) before I purchased my truck. The fellow in the video said they would offer door ding protection but mistakenly refereed to them as Rock Sliders. Door ding protection. That made sense and sold me on them right there along with other benefits. I really like the way they look as well. My 9 year old son uses them to get in all the time tho.

 

Does anyone have a link to a set of quality HALOGEN bulb replacements, for sale here in the USA? Maybe even on the Amazon? Just trying to see if I can rely on the group knowledge, hope you don't mind me asking.

 

I have seen these mentioned a number of times, and recommended in the Headlight discussion thread, and will probably be what I get when I'm ready.

Tungsram H11-55NHP/BP2 Nighthawk Platinum Automotive Bulb, 2-pack

https://www.amazon.com/gp/product/B08B8Y259H

 

These are what I run in the Subaru, no complaints

 

I bought this set for my low beams.

$13 DZG H9 Halogen Headlight Bulb 65W 5500K Super Bright Warm White 12V H9 Fog Light Replacement Bulbs, Pack of 2

https://www.amazon.com/DZG-Halogen-...9+halogen+headlight+bulbs+5500k,aps,92&sr=8-1

 

The Tungsram Platinum H11s are the best H11s available for the 3rd Gen projector. The standard Philips H9 or GE/Tungsram H9 will give you slightly better performance though stock like 3200k color vs the Tungrsrams slightly whiter 3500k color. All the data is in the 3rd Gen headlight thread.

A 5500k blue coating is going to kill output. Coating only remove output, they don't add anything. Blue coatings reduce light output by filtering out yellow light so blue light is the primary light to make it though. The bulk of the halogen output is yellow, meaning you are filtering out the bulk of the light output so the small amount of blue light can be more propionate, thus making the light whiter. The higher the color temp, the darker the filters and the greater the losses. A 4000k coating on a performance bulb is typically is already lower output than stock. A 5500k coating is going to severely negatively impact output. The output will be whiter, but greatly reduced.

 

And the winner is; Tungsram. Thanks guys for all the info, as in TW threads and personal experience/opinions, I placed an order and it should be here before Christmas. I'll be returning the unopened boxes of the LEDs received yesterday.

 

Loud and Clear, like a bell...Much appreciated response. Just for the record, I was just trying to save time and actually I didn't know there was a thread devoted to headlights, I should have known there was so that is my fault. That there green statement would have convinced me right off the bat, because I don't feel like buying/upgrading my whole light projectors. I'm tired of improving what should have been improved from the beginning, for a $40k truck.

 

What Front Bumper is that and where did you get it? Its very tight!

 

Installed the front seat covers and heated seat kit.

 

SSO slimline full plate

 

Just to catch up, let’s see. Side steps, TRD Pro grill with matching emblem and just put new tires on this afternoon. Gotta put some miles on these and see how I like them

 

Fumoto valve, aluminum oil filter cover and Snailarmor tailgate.

Yes, I don't have any pics but i haven't had a mod to add here in a while so I feel the need to jump in.......

 

Wow! You got two months on your windshield? I got 600 miles. The chip is up top and the crack is meandering through the pax side so I’m going to ignore it for now. At least for winter since that’s a dangerous season for windshields

 

I thought the ‘19s on had TSS which include that. Maybe it didn’t come w all the TSS features. I love that feature.