A/C not turning on,windows will not roll down, and car will not shift out of park

Long First Post!

Hi,

This is my first time posting here. I have had my 2015 Tacoma since my sophomore year of high school, I am now a junior in college. I have come into a problem with the truck, however. Woke up this morning to grab some groceries for the holiday and started up the truck. I tried multiple times to turn on the heat but nothing worked, I tried to roll down the window and that did not work either, lastly, I tried to use the wipers to wipe the snow off the front and those did not work either. I thought I could deal with this as long as it drove, turned out the car would not shift into drive either.

Since then I have tried many things to fix this and have narrowed it down to the issues most likely caused by a fuse. I have tried to replace two of the 10A fuses with the spare, I tried replacing the EF1 fuse, and then the A/C fuse as well. I thought there was an IG1 fuse but that is on older models only I believe. I think it may be a bigger 50A fuse might be the issue.

Any suggestions as to what I should do?

This a picture of the fuse box below for any reference:





UPDATE:

I decided to buy a multimeter to test out the fuses and some more spare fuses just in case. There was a family emergency that came up, so the truck sat for a couple of days. I came back and decided to turn the truck on and what do you know, everything is working again. I'm not sure what it was, but the night this occurred there was a freeze over the day before, so I assume that the cold may have contributed to my problem. Anyways, I will still be taking it into the shop to make sure everything is alright, but it seems everything is fine.

 

Check the IG1 No2 fuse.

 

Do you know where that would be located or guide me to where that would be on the panel I posted above?

 

It's in the interior fuse box (behind the little pull-out tray to the left of the steering column).

 

Thank you both! I will go try to switch the fuse and give y'all an update.

 

If that one is good check the IG1 Fuse as well.