Cracked charcoal canister p0441,p0455

Hello TW I've mentioned before my driveshaft u joint broke while driving. Driveshaft hit, and cracked my charcoal canister. I've replaced canister, purge valve, and gas cap. I'm still getting p0441, p0455, and now p0443. I have no symptoms, rough idle, bad mpg. But my dreaded CEL is on. Please any thoughts advice will help. Thank you all on TW

 

Do you have to pass emission in your state? If not, I wouldn’t worry about it.
Emission codes can be hard and extremely time consuming to diagnose.

 

did you replace all of the solenoids and lines running to and from the canister?

 

Its still got a leak somewhere...you check the lines at the canister for damage

 

I am in Commiefornia need to smog every 2 years, did not replace any solenoid or lines. May go to smoke test for leak.

 

Smoke test will def help, sounds like the main solenoid is bad too

 

The lines had inner cracking

 

oh ok...so can you replace the lines or need a tank?

 

My mistake not hard lines, from canister to filter vacuum hose.

 

Just got leak tested is the gas filler neck