UCA Delrin Bushing Question

I have a '05 Tacoma 2WD Prerunner that I'm rebuilding the Baja Kits UCA's on. I have new uniballs and the hardware bolt kit that attaches everything to the spindle coming from BK. These UCA's come from BK with delrin bushings when you buy them new and the usual metal sleeves that go inside the bushings. The bushings look good, no cracks, no scrapes and fit inside the arms pretty snug. The two sleeves that go inside the bushings are not snug and have slight play, like if you turned the arms upside down the sleeves will slowly slide out. Think that little bit of play is worth the $200 that BK wants for the new bushing kit?

 

Well I'm still thinking about throwing these arms on but I'm still not sure about the sleeves fitting tight in the Baja Kits delrin bushings. No one has ever serviced a set of Baja Kits boxed UCA's in the past?