Should I get new UCAs?

Hey guys, I just installed a 3 inch lift on my truck. It’s a 07 pre runner. Will I need to get new UCAs? Thanks guys. And if anyone wants to throw their truck photos up with a 3 inch lift a comparison between it with 265 and 285 tires, please do so! Don’t know which i’m going with yet.

 

Likely. Only going for an alignment will tell you if they are going to be required to align it correctly.

 

3.5 toytec, with 285's tires rub on UCA in tight turns.

 

It’s going into the shop in 2 weeks (they’re backed up). Any good brands to go with, or just the RC generic ones?

 

How bad is the rubbing? Do you think I could run them with just a 3 inch?

 

Yes get ucas. I have tubular ICON Deltas and they're great

 

Very hard to make tight turns /U turns in city conditions. Offroad no problems. JBA UCA's

 

I am not authority on the topic as I am still running OE UCA's. But with the bit of research I've done, I think I will go with SPC as they are tried and true.

 

Do you have wheel spacers? If not, the offset may be part of your issue.

 

I honestly have no idea, I bought truck as is.

 

Determine if you need to replace/work on the LCA. Good probability your alignment cams will be seized.

 

2015 prerunner 3/2 Toytec lift. 17x8.5 -10 wheels 285/70/17 JBA ucas. Zero rub.

 

Is it just my rim offset that makes the tires rub?

 

What wheel and offset are you currently running?

 

And expensive!

 

Not really, the billet ones are over 1000

 

thanks man! I think that’s what i’ll be doing.

 

With my set up. My alignment specs are. 0 camber .05 toe in 4* caster(driver side) 4.25(passenger side)

 

2020 w/ 17x8 +15 offset (factory rims). 265/65 new 285/70 now 2.5" spacer in front, 1" inch block in back. Everything stock no rubbing. no trimming.