What else would I need to buy for this suspension system

What else would I need to purchase if I were to buy this set up? (diff drop kit etc) I just purchased and installed Icon RXT leaf springs (Option 3).

 

Nothing. Probably won’t need the diff drop kit unless you are cranking the preload for more lift.

Disclaimer. By nothing I mean you could buy that and run it with nothing more than an alignment. But there is a pile of stuff you could get extra. Haha

 

So what UCA would you go with then?

 

If they are the ones you don’t have to remove the main arm bolt most of the shops have said they’ll adjust since it’s so easy. Mine are standard heims and my last alignment they said they’d mess with them for an extra 150 bucks.

I just asked what adjustments they suggest and I’ll do them next time I have the arms off the take it back. This is a speciality alignment shop though. Not everyone has a good shop like this.

 

Something with a bushing like these.

https://camburg.com/shop/suspension...ma-05-performance-x-joint-upper-control-arms/

 

Ok so this set up is better for most shops? I haven't found a good "off-road" shop in my area so I would prefer to get a set up that none speciality shops can work on. I usually save all the real work to a shop in NC when I go there 2-3 times a year.

 

Yep there you go. Saves some cash too. Bushings are going to be better for a daily driver as well.

Good call @whatstcp

 

Saving cash is always nice! This is why I love TW always helping the community! dropping knowledge bombs.

 

Are you lifting the rear?

 

I installed the Icon RXT "Option 3" leaf springs and currently the rear is higher than the front. I would think installing the said system id be able to level the truck out.

 

I think you should be good with that set up then. You will love the Fox stuff.