Question about JBA UCAs and clearance on 1st gens

Anyone with a 1st gen have issues rubbing with JBA UCAs?

I'm looking at getting a set for my tacoma. Currently lifted ~2.5" and running 285/75r16 on SCS F5 wheels with 4.5" backspacing. No spacers. Was wondering if anyone with a similar tire/backspacing combo is running JBA on their 1st gen and how much clearance there is. I currently have no rubbing with my stock UCAs.

 

Similar wheel/backspacing combo? How much clearance do you have?

Also, nice truck!

 

285/75-16 JBA fox 2.5s and methods 16x8

 

Perfect - thank you! Haven't been able to find any info on 1st gens with this setup. All the measurements and pictures are 2nd/3rd gen.

 

Material wise they are a bit slimmer than some of the other UCAs. I am hoping they are shipping with the updated grease boots now, my current ones are cracked /weathered after 6 months. I believe they updated them to a different material

 

Curious - did you powder coat the UCAs or just rattle can them?

 

Powdercoat. I was not a fan of the red. Realistically unless you have a media blaster to get the red off it’s worth it to pay someone the 60 bucks to get them repowdercoated