FS: Washington State - Rago Fabrication 2nd & 3rd gen Toyota Tacoma Endeavor Bed Rack w/ 4 molle pan

Face to face sale - Tri Cities WA


As some form of feedback, I've been a member of t4r.org since 2010 and have been on Tacomaworld for a year or so. https://www.instagram.com/jay4runner5g/

--------------------------------------------------------------------------------

Rago Fabrication 2nd & 3rd gen Toyota Tacoma Endeavor Bed Rack w/ 4 molle panels and Maxtrax mounting pins

$1100


Pics: https://drive.google.com/drive/folders/1r4GxKLmqB-yNgzpoiNA2gU0l5NJxoJi9?usp=sharing


This is still in great condition. Been on my Tacoma since early 2021. I decided I’m going to go with a canopy shell instead of a rack. Perfect for mounting a roof top tent or gear boxes. Mounts with 6 Toyota bed rail nuts and bolts (included). Still fully assembled, so it should just drop in.


This is made for a Toyota Tacoma specifically - I have no idea if it will fit your truck. You’ll have to do your own research. If your bed is the same dimensions as a Tacoma AND has bed rails like a Tacoma, it might work. Roof top tent, maxtrax, lighting, other accessories, etc not included x


The Rago Fabrication Endeavor Bed Rack is the future of overlanding and off-roading bed racks. Capable of holding over 700lbs, this rack can do just about anything. Whether you need to mount recovery boards, shovels or pop up your rooftop tent and camp under the stars, the Endeavor Bed Rack will accompany you on any adventure.


Included with every rack is our specifically designed center supports that incorporate ceiling mounting solutions for products such as the Rotopax, Waterport and recovery boards. With the additional slotted holes you will be able to mount endless products to the center supports.


Gain additional lighting capabilities while trail riding in any condition with the built-in chase/rear light mounts. Paired with the Endeavor Bed Rack, the Baja Designs S2 lights will take your vehicle to the next level!


Included in this amazing and versatile design is our side molle panels. These panels have integrated mounting holes for your recovery boards with no additional bracket needed! The Endeavor Bed Rack comes powder coated textured black for a clean attractive look.

 

Face to face sale - Tri Cities WA


As some form of feedback, I've been a member of t4r.org since 2010 and have been on Tacomaworld for a year or so. https://www.instagram.com/jay4runner5g/

--------------------------------------------------------------------------------

Rago Fabrication 2nd & 3rd gen Toyota Tacoma Endeavor Bed Rack w/ 4 molle panels and Maxtrax mounting pins

$1100


Pics: https://drive.google.com/drive/folders/1r4GxKLmqB-yNgzpoiNA2gU0l5NJxoJi9?usp=sharing


This is still in great condition. Been on my Tacoma since early 2021. I decided I’m going to go with a canopy shell instead of a rack. Perfect for mounting a roof top tent or gear boxes. Mounts with 6 Toyota bed rail nuts and bolts (included). Still fully assembled, so it should just drop in.


This is made for a Toyota Tacoma specifically - I have no idea if it will fit your truck. You’ll have to do your own research. If your bed is the same dimensions as a Tacoma AND has bed rails like a Tacoma, it might work. Roof top tent, maxtrax, lighting, other accessories, etc not included x


The Rago Fabrication Endeavor Bed Rack is the future of overlanding and off-roading bed racks. Capable of holding over 700lbs, this rack can do just about anything. Whether you need to mount recovery boards, shovels or pop up your rooftop tent and camp under the stars, the Endeavor Bed Rack will accompany you on any adventure.


Included with every rack is our specifically designed center supports that incorporate ceiling mounting solutions for products such as the Rotopax, Waterport and recovery boards. With the additional slotted holes you will be able to mount endless products to the center supports.


Gain additional lighting capabilities while trail riding in any condition with the built-in chase/rear light mounts. Paired with the Endeavor Bed Rack, the Baja Designs S2 lights will take your vehicle to the next level!


Included in this amazing and versatile design is our side molle panels. These panels have integrated mounting holes for your recovery boards with no additional bracket needed! The Endeavor Bed Rack comes powder coated textured black for a clean attractive look.

 

Face to face sale, I will maybe meet you fairly close to me. I am located in Tri Cities.

As some form of feedback, I've been a member of t4r.org since 2010 and have been on Tacomaworld for a year or so. https://www.instagram.com/jay4runner5g

----------------------------------------------------------------------------------------------------------------


FSR HIGH COUNTRY 55" PREMIUM Roof Top Tent - Grey 3 Layer Walls


$2500


Pics: FSR RTT - Google Drive


FSR HIGH COUNTRY 55" PREMIUM - Grey - Tri Layer Insulated Walls

https://gofsr.com/collections/all-products/products/high-country-55-premium?variant=35160420515999


Bought in April of this year. It was a great tent. Decided I am going to go the canopy route on my truck vs the bed rack.


The High Country Series Premium 55" rooftop tent maximizes room for people and gear, while minimizing it’s footprint when stored—perfect for smaller smaller SUVs and sedans. Our enhanced Tri-layer technology can handle extreme cold weather, but still be comfortable on summer nights. Plus, you can light it up with the integrated LED night light. The all-new 55" will elevate your view…and your adventure.


The High Country Series 55" Premium has a sleeping capacity of 2-3.


Pics on the tacoma are the actual tent, others are stock photos.
----------------------------------------------------------------------------------------------------------------

Baja Designs S2 Sport, LED, Wide Cornering, Amber, Flush Mount

SOLD




----------------------------------------------------------------------------------------------------------------

**SOLD***Gazelle Tents - G6 6-SIDED PORTABLE GAZEBO

$**SOLD***


Purchased this year. Just too big and bulky for our car camping setup. Like a little more minimal setup. It's been setup once and stored inside the house.


Pics: Gazelle Gazebo - Google Drive


https://gazelletents.com/collections/portable-gazebos/products/g6-6-sided-gazebo-desert-sand

 

Face to face sale, I will maybe meet you fairly close to me (not for the RTT or Rack though). I am located in Tri Cities.

As some form of feedback, I've been a member of t4r.org since 2010 and have been on Tacomaworld for a year or so. https://www.instagram.com/jay4runner5g

--------------------------------------------------------------------------------

Rago Fabrication 2nd & 3rd gen Toyota Tacoma Endeavor Bed Rack w/ 4 molle panels and Maxtrax mounting pins

**SOLD**


Pics: https://drive.google.com/drive/folders/1r4GxKLmqB-yNgzpoiNA2gU0l5NJxoJi9?usp=sharing


This is still in great condition. Been on my Tacoma since early 2021. I decided I’m going to go with a canopy shell instead of a rack. Perfect for mounting a roof top tent or gear boxes. Mounts with 6 Toyota bed rail nuts and bolts (included). Still fully assembled, so it should just drop in.


This is made for a Toyota Tacoma specifically - I have no idea if it will fit your truck. You’ll have to do your own research. If your bed is the same dimensions as a Tacoma AND has bed rails like a Tacoma, it might work. Roof top tent, maxtrax, lighting, other accessories, etc not included x


The Rago Fabrication Endeavor Bed Rack is the future of overlanding and off-roading bed racks. Capable of holding over 700lbs, this rack can do just about anything. Whether you need to mount recovery boards, shovels or pop up your rooftop tent and camp under the stars, the Endeavor Bed Rack will accompany you on any adventure.


Included with every rack is our specifically designed center supports that incorporate ceiling mounting solutions for products such as the Rotopax, Waterport and recovery boards. With the additional slotted holes you will be able to mount endless products to the center supports.


Gain additional lighting capabilities while trail riding in any condition with the built-in chase/rear light mounts. Paired with the Endeavor Bed Rack, the Baja Designs S2 lights will take your vehicle to the next level!


Included in this amazing and versatile design is our side molle panels. These panels have integrated mounting holes for your recovery boards with no additional bracket needed! The Endeavor Bed Rack comes powder coated textured black for a clean attractive look.

----------------------------------------------------------------------------------------------------------------


FSR HIGH COUNTRY 55" PREMIUM Roof Top Tent - Grey 3 Layer Walls


$2000


Pics: FSR RTT - Google Drive


FSR HIGH COUNTRY 55" PREMIUM - Grey - Tri Layer Insulated Walls

https://gofsr.com/collections/all-products/products/high-country-55-premium?variant=35160420515999


Bought in April of this year. It was a great tent. Decided I am going to go the canopy route on my truck vs the bed rack.


The High Country Series Premium 55" rooftop tent maximizes room for people and gear, while minimizing it’s footprint when stored—perfect for smaller smaller SUVs and sedans. Our enhanced Tri-layer technology can handle extreme cold weather, but still be comfortable on summer nights. Plus, you can light it up with the integrated LED night light. The all-new 55" will elevate your view…and your adventure.


The High Country Series 55" Premium has a sleeping capacity of 2-3.


Pics on the tacoma are the actual tent, others are stock photos.
----------------------------------------------------------------------------------------------------------------

**SOLD***Baja Designs S2 Sport, LED, Wide Cornering, Amber, Flush Mount

$**SOLD***


Brand new in box - never mounted.


Pics: Baja Light - Google Drive

----------------------------------------------------------------------------------------------------------------

**SOLD***Gazelle Tents - G6 6-SIDED PORTABLE GAZEBO

$**SOLD***


Purchased this year. Just too big and bulky for our car camping setup. Like a little more minimal setup. It's been setup once and stored inside the house.


Pics: Gazelle Gazebo - Google Drive


https://gazelletents.com/collections/portable-gazebos/products/g6-6-sided-gazebo-desert-sand

 

I've got the G5 gazebo -- i love that thing. Super fast to setup, perfect for day trips of camping. The G6 is pretty large but if you've got a bigger group that thing is pretty sweet (though it'll need to be mounted on a roof rack/cab rack). GLWS if i didnt already have a G5 i'd consider grabbing that one

 

Yeah I loved the idea of it, but carrying a gazelle t4 tent and g6 gazebo is a lot of packed down size and bulk to carry around! I love their products and really like the tent.

 

Yeah totally, i also run the T4 and the the G5 for camping - its not too bad size wise with the G5 because its exactly the same size as the T4 so they fit perfectly on my roof rack when traveling. But i can imagine its a big heavier/larger for the G6.

 

pm's on S2's

 

You making any trips over to the west side anytime soon? That or would you be willing to ship the baja lights?

 

Bump

 

Bump

 

Bump

 

bump lowered price

 

Bump