What Have You Done To Your 3rd Gen Today?

Fog lights are yellow now, I will adjust them soon, just a quick shot of the finish.

Amber LED bed lights.

 

A few posts later, here. If there's something in particular you are interested in I'll snap a photo for you.

 

New shackle hangers went in yesterday.

 

Yet another Colorado Taco!

 

lefty-loosey, righty-tighty.

sparks bad.

fuse for the load, not the anticipation of the future.

 

I’m not hanging in anyones garage… I save that shit for work. And generally I prefer to hang right side up.

 

Installed my Diamondback SE cover in the rain and dark… because weather be damned, I’ve got a long list of to do’s between both trucks.

better photos later.

 

I’m guessing just disconnect your negative terminal and that’s it? Wiring makes me hesitant

 

Looks good! I had some difficulty with installing my cover surprisingly lol

 

So you got a different color bezel that goes around the vents and screen? Mine is a silver grey ish color

 

Wrap Armor. Cut it to keep Pro Decal.

 

what are you using for ramps and what is that track system you have to hang things on?

 

The biggest thing for me was putting some weight on top at the corners to compress the weather strip gasket. I used my mud tires for my ‘02. I’ll do the shims and final waterproofing when it’s above 50 degrees. For now this is much better!

 

Did some work with it today.

 

Yes, the parts list is the black versions of the dash surround, door switch panel, and the center console trim pieces.

 

I made a short road trip north to pick up/install my RCI sliders. The folks at @RCI-Offroad were super nice and I think the sliders (5 degrees, no top plate) look rather handsome on my truck! Total build time was about 5 weeks. 22 mpg round trip.

 

I would say disconnect positive terminal or you could still be shocked if you ground a wire on something by accident. I usually don’t disconnect anything though because Im lazy. Except for welding or plasma cutting on the frame