Help with the camber

Hello. I have a question about the camber of my Tacoma. I take to alignment and they said is fine. But looks like positive camber. Should I buy UCAs or wheel spacers? I really appreciate the help!!

 

Definitely looks off. Can you post the printout from the alignment shop? Spacers will make it worse. UCAs are typically for caster, not camber so much.

Also, try to get some pictures of the cam tabs on the LCAs.

 

Mine look the same. Slightly pointed inward almost like pigeon-toed. Mine have been aligned at a shop as well. I have been told it’s just the way Tacos are set up but maybe someone has better info. I definitely hate the way it looks.

 

https://www.tacomaworld.com/threads/positive-camber-on-stock-or.494190/

 

Definitely off. One thing you can easily see with eye is camber and it will wear tires like crazy. Bring it to another shop and see what they say. I had one shop say the same thing after putting it on the rack three times. Went to another shop and they fixed it and said it was off. Not sure if some machines suck with larger tires or what. Or the LCA cams are frozen and they just toed and go.

You could also adjust the LCAs yourself till even to your naked eye. Then bring in for fine tuning. That's what I ended up doing to tune my SPCs.

 

Normal. Tacoma is designed to have positive camber.

 

Mine look the same. Had two alignments in 60k miles. I just make the radio louder.