No dome light when door is open.

Dome light won’t turn when door is open. I know the door pin switches are good because my alarms still works. It’s like the ground signal from the pin switch has an open circuit. Don’t have a wire diagram. Does the light circuit goes to a relay or a control module before the light switch? . Everything was working fine until I added a map lights into the circuit. The map light is just power and ground. remove what I did but, still the same concern . Not getting a ground signal from door pin switch to dome light . Move forum to Gen 1 Tacoma

 

Check and see if you blew the ECU-IG-NO2 fuse inside the cab fuse box, I had an issue last year where whenever i installed the MESO puddle pods with the switch, this fuse continued to blow and my dome lights would not come on amongst other things until I found issue went wrong with pinched wires on the pods. Regardless I didnt gain functionality of my dome lights until i replaced the 7.5 amp micro fuse beneath the steering column.

 

I’ll bet that’s it! . I will check this weekend. Thanks ! Any pictures ?