3rd Gen Tacoma SwitchPro/Auxbeam Switch Panel

Hi guys,

It has been a while since we made a post, but we are back on TW. We will be more active on TW starting today, and we are excited to share everything to come with you guys!

In this thread, we are showing a new product for the 2016-2022 Toyota Tacoma. In the photo below, you will see a switch panel that we have in production. This panel will accept an Auxbeam or similar 8-button switch controller. It can also take the Switch Pro

$659 SP9100 Switch Pros SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware

SP9100 with the adapter plate. The panel will also take five small style switches and/or the rear window switch in the bottom row. The rear window switch is on a 2017-2022 and is generally located on the left panel but sometimes under the climate controls. If your truck is equipped with the cab/bed light, it will be relocated to the right of the switch panel. This kit will include a cab/bed light replacement face so that the words are correctly oriented.

The panel's material will be made of the same plastic like the factory panel and will also have the same texture. For those who have a manual transmission, we will have a small style "Clutch Start Cancel" button available. We made it a small style button to keep the buttons on the bottom row the same.

This panel should be available at Runnin4Tacos.com in roughly a month. Let us know what you guys think!

 

Very interested in this. I purchased a similar item from Etsy and was very disappointed in the quality.

 

was this it?
Auxbeam GA80 8 GANG Panel Mount for 3rd Gen Toyota Tacoma - Etsy

 

No it was a different seller.
https://www.etsy.com/listing/1149264005/

I ordered the one from runnin4tacos and couldn’t be more pleased. Picture attached.

 

Just found this thread after deciding to invest in an AuxBeam 8 gang switch panel. I've been really wanting a new switch panel to replace the OEM one, in order to accommodate the new 8 gang switch set up.
It seem most of the 8 gang panels available are on Etsy, and the 3D print lines are very noticable.
I was really hoping for a much more OEM look, and this looks like it will definitely fit that bill much more effectively!