2011 not starting. no crank no click

So if you leave pin 3 and 5 connected you should have voltage at the small wire of the starter when you try to start

 

Update

Even though I jump 3-5 don’t I have to jump it to 1-2. But I’ll try it. Doing it now lyk in few minutes

 

Don't jump pins 1 and 2 together, you will either blow a fuse or fry a wire.

 

Only 3 and 5

 

Ok just finished jumping 3-5 and checking starter like other picture with starter. ‍♂️ this truck. And no light.

 

But you have power on pin 5 when you turn the switch right?

 

No lights - no click, no crank?

I had the same problem last year.
Alternator killed the battery - new alternator fixed it up and zero issues since.

 

Yes I even got a starter relay from my car that’s running and swapped it and still no start.

 

This would be good to know, we are here assuming the battery is good but not sure it the OP has checked battery voltage.

 

so if there’s power on pin 5 when you turn the switch…and you connect 3 and 5 together and you don’t have voltage at the starter the wire is broke somewhere from pin 3 to the starter

 

I’m assuming also…he said he jumped it and replaced the battery in his first post..

 

Update checked battery and it’s good. checked am1-2
Starter relay good
Checked power to starter good

Possible problem could it be the ignition switch

 

Yeah went to autozone to check it and they said it was fully charged

 

If your getting power to pin 5 the switch is good

 

thanks man. Appreciate everything it’s getting kind of late now. But if anyone has any ideas lmk. Please worst comes to worst just might have to take it to the dealer.

 

Ok so let's recap.
Have you verified your test light works before each test?

Test light ground connected to battery Negative and the tip on Pin 1 of the starter relay connector, does it light with the key in the crank position?

Test light ground connected to battery Positive does it light when you touch the tip to Pin 2 of the starter relay connector?

Test light ground connected to battery Negative and the tip on Pin 5 of the starter relay connector, does it light with the key in the crank position?

Test light connected to battery Positive and starter plugged in, does it light when you touch the tip to Pin 3 of the starter relay connector?

 

Negative pin 1 no light
Positive pin 2 lights
negative pin 5 lights
Positive pin 3 lights

 

Yes read the first post he even replaced the battery. I had to edit my post because of that lol

 

Interesting, it should crank then if you put a jumper wire between 3 and 5 and turn the key to crank.

I'm assuming you verified the STA Fuse is good and has power on both sides with the key in the crank position?

Pin 1 comes from the Park/Neutral Position switch, you can backprobe pin 5 (Black/Yellow) at the Park/Neutral Switch and check for power there with the key in the crank position. If you have nothing do the same test at Pin 4 (Violet).

What were the events that led up to this no-crank?

 

Starter is bad?