Trying to find correct connector

I we are trying to connect a fuel filter line (maybe) it has 7 prongs on harness but on the plug it has 8 and the problem is the prongs aren't color coded so we arent sure which goes with what.

If someone could help by sending a picture of schematic of that page, it would be greay appreciated.

I have attached the attachment with the colors on there but the prongs are all just black.


Thank you!

 

Appears to be the Canister Pump Module Connector.

What year and engine is your truck so I can look up the appropriate diagram?

 

Yes thats the connector!!! Can you send me wire colors, they have been chewed up. Please!!
And its a 2015, 4 cyclinder

 

Do you have any more advice as to how to reconnect them?

 

Here you go, these are 14 diagrams but 15 should be the same. Mitchell doesn't have OE diagrams for 15.




Fuel Pump Connector

 

Buy new connector, terminals and seals and orifice plug, snip wires straight & crimp terminals. Insert into new connector, enjoy.
NOTE: Numbers on connector is terminal side NOT wire side.

 

Ok, so do you know where the other prong will go, simce it comes with 8?

And i just want to say you have been amazinlg.

Thank you so much

 

Only 7 are used, just put a piece of heat shrink over the unused terminal wire or de-pin it and use the plug out of the factory connector.

 

Ok we are going to try with the onformation you gave us.

Thank you!