Updated suspension on the taco

Recently did the ome Dakar pack, extra leaf, greasable shackles and ome nitro chargers. Up front I used Toytec adjustable coilovers and jba uca, bilstein 5100. Rides great (little stiff but not bad). Little jack rabbit going on but I’ll let it settle and see if I have to increase the front. I have Firestone airbags and daystar cradles when I carry things.

 

Looking good

I like it.

 

Good work!!

 

Looks good! I'm about to tear into my suspension as well.

Are those Aftermarket UCA's?

 

Yes. They are JBA upper control arms. They have worked very well. A lot of people (when they were new) had issues with the ball joint boot cracking and ripping. I have the updated design and they have been holding up for the past 2 years with no problems. No noise from them at all either. I refreshed my lower control arms with whiteline bushings and all new caster bolts/hardware.

 

Any pictures of the front suspension set up?

 

The front suspension is about 6 years older than the back. Little dirty but - works fantastic still. Eibach 600 coils on Bilstein 5100s. I put the JBA's on about 2 years ago. Maybe a little less than that.

 

Got it I thought you we’re running toy tech springs also . I was looking I to toy tech set up . I have 5100 on ome 881 an jba uca works good also .

 

Those are Toytec coilovers. They just came with Eibach 600 coils and Bilstein shocks. I believe they still come with Eiach coils or other options.

 

Got it .