New member, with a little project.

Hi! Thanks for letting me joining in!
Justin here, from Qc, Canada.

New garage, almost ready, so time to take a break and try the lift....

Bought my first tacoma, a 2010. Truck had transmission issue. Took a chance at it. Found a 35k mile tranny out of a 2013 for cheap, but the torque wasnt include. Took a chance with the old torque in the new tranny. I removed old setup and washed torque with new oil several time. Put everything back together with the new tranny, tried to start, nothing..... few hours later find out that the the neutral switch wasn't good, and pita to remove. Long story short.....New neutral switch, adjust, and vroum!

Now truck engage forward/reverse an all speed work.
Thanks to those post


Transmission
https://www.tacomaworld.com/threads/how-to-drain-refill-automatic-transmission.63851/

Safety switch
https://www.tacomaworld.com/threads/09-tacoma-no-power-to-starter-relay.695105/

Can't thank you enough for those post!

Now have a 4x4 issue.
Trying to select 4x4 in N or P or in gear it keep flashing all the time, even in 2wd.
have to shut key power, switch the selector to select option (2wd or 4hi or low) and when I start truck back, select option go on. (I know i'm in 4wd, but light still flash) Have to do same procedure to put it back in 2wd.(light still flash but it's in 2wd, 100%positive)

sure I will find the solution with help from this forum!

 

Welcome to TW, Justin…nice garage setup and truck!

 

Fix your 4x4 here.
https://www.tacomaworld.com/threads/4wd-system-operation-help-thread.742420/

 

Welcome to TW! If you post your issue in the 2nd Gen. section you’ll probably get more feedback.