Advice for install option on Icon RXT Leaf Pack

Going to be installing my Fox 2.5 Performance Elite's this weekend. I have the rears that are intended for 2-3" of lift (FOX 883-26-113). With this in mind, what is the recommended install option for my leaf pack?

 

How much weight (bumpers, sliders etc) is added to the rear of your truck?

 

@AccuTune Offroad No after market bumper yet, or for a while. Just running DCLB sliders.

 

The Icon image above has weight ranges on the left. If you plan to add more weight in the future, I would probably just stick to option 1 for the time being, then adjust to option 2 later.

 

I guess what I was hung-up on was the lift height. The Fox PES rears are spec'd for 2-3" of lift whereas option 1 is for 1.875".

 

It will be fine, you may want to consider longer bump stop spacers also, since those shocks have a longer compressed length. If you keep stock, the shocks will bottom out before the bumps do

 

Okay, sounds good. I picked up a set of longer bumpers for that reason. Thanks for the advice!

 

I did option 2 and I have DCLB sliders and an ARE MX shell plus other odds and ends. Easily 200+ pounds. I got more than the advertised lift with that weight and netted out at 2" in rear.