What Have You Done To Your 3rd Gen Today?

Installed the 400watt In-Motion Harness with 120volt outlet. Along with the 120volt outlet I installed a usb port in the rear of the center console.

Thanks @GuildOutfitters

 

How accurate is it?

 

Where did you get the mounting plate for the USB and 110V outlet?

 

I don't have an independent means to verify the parameter values displayed by the P22 display, but the readings are what are on the OBD2 data bus, and therefore what would be served up to a tech with one of their tools...

Speed and RPM seems to match well with the analog dials, battery voltage looks good. The way the engine oil temp and coolant temp trend seem very reasonable to me. Compass direction matches that on the rearview mirror.

For some readings, I think you can enter a bias or trim.

The display that one uses last, is the one that is presented when the vehicle is restarted. Update rate on the 12-grid display is very good. Somewhere between .5-1.0sec per update. The manual is uploaded to my first post on the P22.

I think there are some domestic ebay sellers that have it if you don't want to deal with the delay from China (I think it's pretty timely fulfillment to be honest). But, you'll pay more for the device via ebay.

 

installed my new wheels and tires today

 

The John Deer tractor I feel sorry for not the Chevy truck !

 

I have a manual, ECT button not an option for me.

 

Karma's a bitch....

 

Last night the carwash place knocked a letter off my grille. I unknowingly drove home in a TO OTA. Well crap. I guess that means its time to spring for the LC emblem instead of the cheap peel n stick letters.




Meanwhile, I'll be riding unbranded for a week.

 

RIP TOOTA

I actually don’t think it looks too bad with no letters. Drill it out and mount a light bar / pods, grille lights

 

I got my Tacoma a stable mate yesterday does that count?
2006 CTS-V LS2, picking it up tomorrow hopefully.

 

Survey says








Yes

 

What bumper do you have installed?

 

A no-brand knockoff of the BA HiLine

 

I’ve been considering this grill for sometime now. How is your TSS sensor with this grill? How was the install?

 

Install was easy.

I'm one of the very few that had issues with TSS, but it was strictly because I was looking at different methods for blacking out the sensor shield. Once I found a method that worked, the TSS has been dead on perfect. Had I left the shield alone, the TSS wouldnt have given me grief in the first place. But of course I can't leave stuff alone.

 

Simply put it in the receiver upside down. Round ball hurts less on shin than nut/edge.
There on the left side is one side of the locking pin. Other side has a rubber piece that covers the lock.

 

Man, first time I put mine on, I knocked it at least once a week. Took months for me to remember it was there

 

Had some vacation days to burn before they just get paid out in March(I get taxed more if they pay them out) So with 114,000 miles, passed PA inspection/emissions with no issues this morning. Crazy, I feel like my old Frontier ALWAYS had something that failed… Anyway, stopped at the car wash on the way home, grabbed the dog, and took him to get groomed. Didn’t think I’d ever pay to have a dog groomed, but it is very nice not having to bathe him myself…

 

They look slick with Cement. what front license plate bracket are you using?