Adding Lights / 2013 Tacoma

Hi - I am about to add two 3" LED lights on my 2013, with the hope of adding two more in the future.

Any recommendations on what I need to do with the battery set up? Do I need to get a new battery? Or add systems to the vehicle to make sure that the lights operate correctly.

Lights - https://www.lasfit.com/products/spo...KCyu48-IRI92XOuIFhKaHZtQFa_NCBG0aAstEEALw_wcB

Thank You!

 

Shouldnt need to do anything to the battery. I cant tell if they come with a relay but I would wire them to a relay to be safe.

 

An easy set up. Connect to battery, connect lights and should fire right up. Looks like the selection to include the harness is what you want. also, whatever light pattern you want. Above was just the default that came up.

EDIT: I'm not a fan of those switches. They work but I always use and OEM style switch. Air on board / CH4X4 etc.

 

Thank you - I was thinking of using this switch

- https://www.ebay.com/itm/3039023158...cH1gpjRPVidGysCRNOzxg4lJ0NL8ja_YaAjjwEALw_wcB

What is the best relay you have used?

 

The harness should have the relay with it.

I'm not too familiar with that switch but don't see why it wouldn't work.