Magnuson Supercharger Mega Thread for 16+ Tacoma - Unboxing, Install DIY, Dyno Video

Thank ls for the details! It’s nice to know what I’m getting into.

 

Have you guys removed that charcoal filter with the supercharger?

 

The charcoal filter for the evap system? Only other thing I did was a PCV catch can.

 

Yeah that’s the one!
I’ve watched a few dyno runs where they show it does increase HP if removed

 

Where is this filter located?

 

It’s within the air box and it’s a thick charcoal filter that’s plastic welded in

 

Could you post the PSI boost for each pulley yall tuned on? I know that Magnuson advertises their stock tune is putting out 5-6 PSI on their website. But I'm interested in seeing what your tune changed it to if any in the stock pulley and also to be able to compare it to the 87mm or 84mm

 

I just checked, his v8 file was for ECUID 04C30, so you must be right. Can't imagine us 04B14 folks will get an update ever, not that I'd want to go back to it anyway.

 

Does anyone know if there is added weight over stock with the maggy with all associated components? I am trying to total up how heavy I am over stock to adjust preload on coilovers. I'm sure it wouldn't be much if any but just wondering if anyone has calculated the total kit weight minus oem parts removed.

 

I didn't calculate the weight difference but it's negligible. My height is the exact same before and after Maggy. No preload adjustment needed.

 

I don’t know, I swear I got a little taller when I got my supercharger.

 

The magnuson is probably in the neighborhood of 50-75lbs heavier. Not much gets removed other than the oem upper and lower intake.

side note… I finally installed 5.29s to complete the magnuson with YotaWerx tune and Wow what a huge difference it made. This thing rips!

 

90mm vs. 87mm vs. 84mm

We've got a few PM's on how the various pulley sizes affect output. Thought you guys might benefit from the data.

 

400+!!!!!!!!!!!!!!!!

 

Wow those numbers are impressive. What are the modifications on the vehicle that dyno sheet came from (As in does it only have a supercharger or other mods)?

Do you only offer custom tunes or do you also have off the shelf tunes?

 

Modifications:
Magnuson Supercharger
84mm Pulley
URD Spec-U Exhaust
Overland Tailor Tuning - OTT

All tunes are based of dyno research/development but OTT offers fully custum tunes to accommodate almost any setup.

 

love it if someone would do a head to head compar-o between Overland and Yota Werx tunes for the Maggie. same truck, same pulleys.. dyno each. the numbers on the overland tunes seem almost too good to be true!

 

Sweet. What octane? Any ice involved?

 

That would be awesome.

 

Approx. 93. It was a blend.

No ice or other “trickery”. It made what it made. I will admit, I had to lean on it hard to get there. It won’t come easy.

We do have 3 back to back runs to confirm it wasn’t a fluke.