Two Unknown Connectors by cabin fuse box

Anyone know what these are? The one the one to the left (5pin connection w/4wires)was taped up to the power mirror wires not being used.

The one on the right was hanging loose and unused.. 6 pin connector with 4/wires ..

 

I'm trying to add switches and wondering if I could use one of these to wire up rear bumper flush mount lights

 

Traction Control Switch



Roll Sensing Side Curtain Airbag Off Switch.

No, they don't have any power going to them, you could use the ground wire as a source and switch the ground side of a relay through the switch if you wanted to.
Pin 1 (Green) is Illumination +
Pin 2 (Green/White) is Illumination -
Pin 3 is the signal wire so for sure don't connect anything to that
Pin 4 (White/Black) is constant Ground

 

Thanks I found another thread on here a little after posting ... So the harness does have power...I connected the switch..do you think I could use the positive grey wire to connect to the rear lights ? I know you said don't connect but that pin also has power..?

 

I wouldn't recommend it.
I wouldn't use those switches for anything more than to trigger a relay anyway, they are only designed to handle a max of 3 amps.

 

This. 100%

Dash switches are low current switches made to fire relays off or tell an computer to do something. Place a ground switched relay close to the battery (fused of course) and feed it into pin 3 of the switch and call it good.