Crank pulley

2007 v6 I’ve used a 700 lbs impact can’t get a budge. I’ve tried a socket and turning it over. Broke two wrenches. I’ve tried looping the belt around it nothing. It’s a 22.5 online when I look it up but a 22mm fits fine.I believe I am trying to take off the crank pulley.? Am I doing something wrong? I have no idea where the oil is leaking from. I did an alternator change without a new belt and it shredded around every pulley. How high can the oil leak from?

 

It can leak from as high up as the valve covers.
But more than likely, when you shredded the belt, it took out the crank seal.

The bolt is TIGHT. You need to find a bigger wrench if you are breaking them.
The crank pulley is a 22mm, you need a breaker bar to get it loose. 1/2” drive at a minimum.
Forget trying to use a ratchet. You’ll just break them. (As you found out)

As for how to get it loose. Check out your other post.
We suggested ways in that post.