If you have a 4" lift in the front, what is your setup?

Looking for ideas here. I currently have a BDS 4" lift on my 2018 OR. The front suspension uses the stock Bilstein and coilovers, with a 4" spacer block.

I am interested in removing the spacer block, and replacing it with something that would meet that difference, so I am curious what everyone else has.

 

...

From what I can see, the 4" BDS is a drop bracket lift, not a spacer. If that's the case, your options are limited.

If you want to run something different, you're going to have to replace the center crossmember and bring it down to 3", or better yet, 2".

 

This ^^

 

Fox pt# 883-02-048 (also # 883-06-048) should fit w/o the spacer.