What Have You Done To Your 3rd Gen Today?

Used tires are worn to match the vehicle they came off of, therefore you are hearing the change in pattern wearing on your truck.

 

Is that bad for the truck?

 

Ill end up being bad for your psych . You'll be wasting time thinking about it. Plus why make yourself suffer for 50k miles with it.

 

Well they’re old I was just wondering if it’d ve okay to burn then until next winter, they came with the wheels

 

Sounds like you have a plan. Good luck

 

It is from Renogy, it technically does not fit but it fits close enough.

Renogy Standard Group Straps, Adjustable Divider and Mounting Brackets, Heavy Duty for RV, Automotive, and Marine Box, 24-31 Battery Sizes

https://www.amazon.com/dp/B08LKK74SS?ref=ppx_yo2ov_dt_b_product_details

 

My Tacos have been tuned since 2018. You won't be happy with your truck until you get it tuned. It's pricey but no more than sliders or a metal bumper. Best Mod there is. Get ahold of Paparay and he'll fix you up. He will treat you like his best friend.

 

You could try moving the front to the back and back to the front to see if this reduces the noise.

 

My question is will this damage my truck in any way. I can deal with the noise. I just want to know if the uneven tread is hurting my vehicle

 

Me older bro has the Kita saw, and doesn’t like it as it will shut off in the cut under certain conditions.

I don’t know if it is still there, but there was/is a Milwaukee shop on Beach Blvd, northern part of OC where you can take your Milwaukee powered tools to get fixed. I have a grinder that is waaay old and it has always fired up for me(and still working). Alls it needs is a new cord and possibly a new brush.

 

Love mine, they make a case for them now, but back when I got mine, I had to improvise...

 

This is my go to saw on trails. Small enough to swing, but acts like it has big balls(machined for compression and finger ported) to cut through big wood if necessary.

The legendary 346XP.

 

IMO, I don't think so. Only if the tires were un-ballanced would it cause an issue over the long term. If you are experiencing vibrations or pulling in either direction then I would have them re-ballanced for piece of mind.

 

No it’s not, and the noise will change slightly over time, becoming less prominent . However, tires that were mated to the original vehicle will continue to wear in the same pattern as well as the new pattern on your truck, so the lifespan isn’t the same as if you put brand new ones your vehicle.
The variances in frame tolerances are a go-no go on the assembly line, they make final adjustments with toe, camber, and caster to meet the go no-go specification before they are shipped.
They will continue to wear in the original pattern from the vehicle they were removed from, which may be minimal, but inherent. A good example of this is a tire that is worn on the front of a new truck due to toe in or toe out. You may notice the wear, and take your truck in for an alignment and even rotate those tires to the rear during the service. However, that wear pattern is imprinted on that tire now and will continue to exhibit it throughout the balance of its life span. The only thing you are now doing is trying to minimize that wear pattern for longitivtiy of the tire.

 

Finger ported 346xp.

 

Thank You I appreciate it

 

Thank You, yeah there are zero vibrations or pull so that puts my mind at ease thank you

 

I’ll stop, but I do swing Huskies :0)

 

Yes 400W running 100W not running.

 

I have not had mine tuned, because the pedal response doesn't bother me and the shifting has not pushed me over the edge just yet. When the shifting bothers me the most is when I tow our small travel trailer, but I just manually shift it and it works for me.

There are thousands of pages on this forum regarding tunes people have done, just do a search.