What Have You Done To Your 3rd Gen Today?

Spoke to him yesterday……..sounds like a nice guy……think I’ll be driving to Waco…..
Curious, what tune did you do?…….happy with results?……noticeable difference?

 

Installed Front and Rear Bump Stops from PerryParts...figured I would give them a try.

 

For long lonely roads or when you find cheap gas. I use seribner 5 gallon containers since they are
square and waste less room. Never found a good spout and used the home made one on the left.
Found a company that makes a nice spout. Called "Race Spout" works well. They do have some
self vented spouts and are working on one to fit my jugs.

Universal Gas Can Spouts & Nozzles - Made in USA | Ai13 Billet – Ai13 Billet Products

 

Fly Racing makes a 5 gallon container called LC2 that works well for this.

 

Yeah, you can’t go wrong! Kaleb is a great guy and will treat you right. I went with the KDMax 9.0 with “normal” throttle.

It’s honestly the best mod ever. The throttle response is night and day compared to stock; shift points finally make sense, it honestly feels and drives like a different vehicle (in the right ways). I have not pushed the ECT button but once to try it since the tune, and that includes when merging onto DFW freeways. I can’t imagine using the ‘sport’ throttle setting but it all depends on how/where you drive. Kaleb will walk you through it.
Have fun and enjoy the drive home in your new Taco!

 

Added some flair to the scoop I recently wrapped. Still have a couple bubbles but they say those will resolve on their own. Anyone know how long that might be?

 

Installed the Flatirons Overland attic storage net, and I also installed the BnS Overland spare tire mount & propane tank mount. I'll be swapping to black ratchet straps soon.

 

Installed my 5 Star FN wheels and some new tires.

 

I think this post was just the thing I needed to find the drive to go through the pain of deadening my cab. Did you do floor too?

 

Washed her, threw on some 285s, and snapped some pics with the Nikon.

 

Beautifully done!

 

Nice!did the doors alone reduce wind noise? I’ve got a roof rack that is much louder than I had expected.

 

Chrome bumper gone!

 

Not sure how long honestly, but once the temps start climbing you should see some improvements. I replaced some decals on my Jeep hood and once the temps got hot, the bubbles began to go away. I wouldn’t stress over it yet.

 

Amber Lamin-x for the fog lights. Cheap and easy to do.

 

This thread is so dangerous. First time scrolling this particular thread in years and I Immediately bought something…

 

anybody try or use a RYOBI portable compressor ?