Updating Rims

I have a 21 Tacoma SR access cab 4wd with the stock 16x7 rims. Want to go to a 16x8 rim. Will I have any clearance issues with 0 offset ? Truck has a 1 3 lift level. Thanks

 

Lift doesn't matter if you are going to stuff the wheels. But, 8in, 0mm offset is no big deal if you stick with 265s.

 

Thanks

 

3” up front and 1” in the rear? You could go 285/75-16

 

Yes. Going with 265 75 16 just concerned about the rim clearance if go to an 8 inch rim with no offset

 

I have 17x8.5 -10mm with 32s. No issues at full uptravel.

 

Great. Thanks

 

depends on what tire size, at 16x8 at 0 offset you can safely run stock or slightly bigger without rubbing scrubbing on anything

 

You should be just fine. I have a 2 inch lift up front and my wheels are 16x8 with a -10mm offset. Tires are 265/75/16.

Nowhere close to rubbing. I previously had 285/75/16 mud terrains on the same set up and those didn’t even rub.

 

You’ll have zero issues. Your stock offset is 25, and you’re going to 0 offset, so you’re bringing your wheel out 25mm. You’ll be fine with 285/70-16

 

Great info. Thanks

 

How did it turn out

 

Just ordered the rims. I will upload before and pics when it's finished. Thanks for asking