Will 33” x 12.5“ tires rub?

I have a second gen Tacoma lifted 3 inches and recently bought some used rims. The current size on them is 35” x 12.5” 17R but I wanna size them down to be 33” tall. I’m gonna keep the width the same but I’m afraid they will rub while turning. I don’t mind if it’s a little rub at break but if it’s a lot of rubbing then imma have to trim and I don’t wanna do that yet. Please help!

 

If only there was a search function for the 4 million tires posts of will this fit

 

Yes they will. Search. CMC.

 

@wilmertoribio98 with us not knowing the offset of the used wheels, it could very well rub like a big dog. Do you know the offset? What tires are you considering?

 

From what the owner told me the rims are 17” x 9” with -12 offset so I’ll probably size down the width as well to 11.5” or 11”.

 

Yep they’ll rub. It can be done. I have 8.5 -10’wheels with 285s . Aftermarket ucas and a very good alignment guy, mine don’t rub at all but it’s more work than you think.

 

@wilmertoribio98 a 9inch wide wheel requires a +5 at least. I'd say your going to have issues.

 

But how much would they rub though? If they rub a little bit when the wheel is fully turned I don’t mind but if it rubs like crazy then I’ll probably sell them or trim a little bit of the plastic off.

 

Going to rub a lot. Just took my 33x12.50R20 off my truck because that reason. They are going to rub way before full lock just an fyi.

 

Are you running any kind of aftermarket UCA?

 

What size width are you sizing down to because the rims are 9 inches wide so I wanna get an idea of what would be best.

 

No the lift that I got was a spacer lift so I basically did it just for looks.

 

I was running 20x10