Oil Control Valve connector part number

I recently changed out the oil control valves on my 2006 Tacoma PreRunner. Of course as soon as I breathed on the connectors, they broke. I have them zip tied on for now and that would probably be ok, but I want to look at getting new connectors and repin them if I can.

I found some old threads that referenced a website with a ton of connectors and part numbers, but I could not find the specific page for the connectors.

The connectors are two pin female connectors and they are located right above the cam position sensors, I think. There are four connectors in the general area and the oil control valve connectors are the top two of the four. I have them highlighted in orange. I would appreciate any help.

@caribe makaira

 

Picture showing the actual connectors would be better...

 

I'll throw one up after lunch. I just dropped the truck off for an alignment. Pretty sure it's the C3/C4 though, but I'll add the pic to make sure. Thanks!

 

Awesome, thank you.

 

@Blain photos showing the part number and actual connector is best.

I have a few of these connectors in case they break during the installtion of the performance vvti solenoids. Yes, they are brittle after all the years.

 

Here's the pics @caribe makaira. You can see the zip tie I added to keep them snug.

 

https://www.corsa-technic.com/item.php?item_id=747

 

Thanks!