What Have You Done To Your 2nd Gen Tacoma Today?

Rad!! What is it made out of?

 

Just some 22g aluminum sheet covered in black ultrasuede.

 

Finally mounted the XM and GPS antennas to the dash.
This view is from underneath the dash looking up. I need to route the antenna cables and make sure the XM antenna is straight before reinstalling the radio.

 

Added grease to my UCAs last night and didn't notice the clunk I have had in the front this morning. I'm hoping that solved it.

 

I've got 45 percent on my Windshield and it's really not that bad. Lol

 

Thank you! If anything, I find it’s easier on the eyes at night.

 

Installed (with child labor) the BilleBars tailgate cover. This has a nice foam pad to protect my, and my kids, knees.

 

Guys check out my buddies new YouTube channel about second gens. There’s an Instagram page too you can follow and send your trucks in to be featured. Check it out and show your second gen love.
Here’s the YouTube channel: https://www.youtube.com/channel/UCRrTW9fPttC6MfH6Bgvkgkg

 

Did you make an account to spam oor? Asking for a friend

 

Nope just trying to support a buddy

 

Fridge cover done

 

I have the same ones, Great upgrade

 

Installed Bilstein 5100’s and new end links on the sway bar. Rides like a new truck and no more annoying clunks.

 

would you happen to have a link?

 

Took a picture!

 

I DIY’d mine and it’s super easy. Buy a Lowe’s/Home Depot bucket (or ABS plastic sheet if you’re fancy), cut out the bottom of the bucket, take out the stock tweeter/bracket combo and trace it on this plastic with a sharpie, cut it out, and then use a knife or large bore drill bit to make the hole diameter you need to fit the tweeter snugly.

 

Those are woofers integrated with a tweeter. You’re going to be better off going with a tweeter alone sound quality wise since your mids will already cover the frequency range that the woofers are outputting.

 

I installed dobinsons front and rear! New SPC uppers as well

 

Removed the studded duratracs put on the stt pros, removed the canopy to sell it, got the truck ready to trade it in.

 

This project turned out great! Thanks for sharing