2011 TRD Tacoma (wiring help)

I'm adding a Neutrino Black Box (have had great success with these units on motorcycles and had a leftover unit) to automate some accessory lights. The NBB will be mounted on the passenger side engine bay.

1) The NBB requires an ignition wire - where's the closest place to tap an ignition wire or an alternative? I apologize for the hand holding request as I'm a novice.. please coach me on where to identify, color of wire, and pics would be greatly appreciated.

2) Intent is to run a trigger wire for the high beam to the NBB - this site was a great aid when I needed to identify and locate the tail light wiring schematic for a trigger. However, I cannot seem to locate for the high beam. Again, if someone could help me where to identify, color of wire, and pics that would be awesome.

Cheers
Brett

 

Lime Green Wire

Add-a-Fuse to High Beam Filament fuse

 

Thanks Caribe for the help and getting me squared away on the basics!
Have a great weekend all.

 

Some reading material:
IGN tap from under/inside the engine fuse box