Stock rims and 2in lift. Rubbing question

Hello everyone, I have a 2023 SR on order that should be arriving in 20 days or so. I'm planning on putting a lift in it. Most likely the "Old Man Emu 2-Inch Stock Load Suspension Lift Kit" and SPC UCA's and want to install 265/75/16s. My question is can I run that tire size with the stock 30mm offset steel wheels? I would like to avoid spacers and rubbing. I also plan to off-road and flex the suspension. I'm open to changing the wheels to one with a different offset but would rather keep the stock ones if possible. I searched around and most of the info that I found was related to 33s which i dont plan to run. Thank you for the help in advance

 

Welcome to TacomaWorld

 

265’s come stock on the TRD trims. You aren’t pushing the envelope.

 

Yes.

 

Wouldn’t the rims be at risk of running on the ucas after the lift because of the +30mm offset?

 

Here's 2" lift with stock 30mm offset sport wheel with 265/70r17's so same size you want to run in your 16's.No rub at all.
Stock UCA's

 

Exact suspension I just installed, heavy springs though. I'm on 265/70/17's on stock Sport rims. Not even close to rubbing.

 

Perfect. Thank you everyone !

 

I had 265/75/16 on my stock suspension before I went 5100s and I didn't ever rub for what its worth.

 

Do you like the SPCs?