‘11 Speaker Wire Path?

I got a good one for you guys…..

I’ve been trying to chase a speaker wire issue that’s driving me nuts..

I have no rear speaker output in my truck, neither rear speaker functions.

It’s an ‘11 access cab with those silly little headliner speakers.

Pulled the headliner, everything looks fine up there. Tried a known working speaker, nothing.

Pulled the factory headunit, jumped a speaker into the plug for the rear speakers, it works.

My issue lies somewhere between headunit and the headliner.

My question for you is…..

Where the hell does the speaker wire harness for the 2 headliner speakers run?

I assume from the radio then behind the cluster then down around the fuseblock then up the A pillar on the driver side?

Are there any more plugs in the harness that may be loose/unplugged?

It this plug the speaker wires on the A pillar ?



After pulling the headliner out of this truck, I don’t really feel like pulling a whole buncha shit apart again to trace speaker wire harness.

If I have to rip everything apart again, I might just run new leads.

I’m hoping someone can point me in the right direction.

Thanks.

 

The part described in thread below keeps an average speaker from playing. Hope this helps. https://www.tacomaworld.com/threads/radio-condenser.270811/

 

Thanks.

Already solved it.

https://www.tacomaworld.com/threads/‘11-speaker-wire-harness-location-path-plugs-solved.800141/