Garage Sale - KC / Baja Design / Bumper Part Outs / Misc

Hey TW, I'm cleaning out my parts bin and have the following for sale. All parts are available for pickup/shipping from Miami, FL 33114. All prices are for pickup. Shipping estimates available upon request. Buyer to pay PP G&S fee at their discretion. Open spoilers to show photos. Additional pictures available upon request.



KC HiLiTES Gravity® LED G4 Toyota LED Fog Light Pair Pack System (Amber)

Bought from a fellow TW member and used briefly to replace OEM fog lights. Removed during front bumper replacement. Includes adapter for H11 connector on OEM fog light harness. Best OEM fog light replacement for harsh weather conditions per crashnburn80's excellent fog light review. I may have the (2) mounting screws somewhere but have to look. If you have OEM fog lights, you already have the screws. Pictures confirming light function available prior to purchase.

MSRP: $354.99
Asking: $260

Spoiler

KC HiLiTES Flex Dual LED Lights Spot Beam (A-pillar/ditch lights)

Catch and release from a fellow TW member. Never personally installed. Comes with harness and amber covers. Does not include OEM switch. Pictures confirming light function available prior to purchase.

MSRP: $442
Asking: $300

Spoiler

Toyota OEM BSM (Blind Spot Monitor) Sensors (Pair) PN 88162-04015

Self-explanatory. Removed at 25k miles during bumper replacement.

MSRP: $1,632.28 (pair)
Asking: $125 (pair) SOLD

Spoiler

Baja Designs S1/S2/Squadron Harnesses (SKU 640117) and S8 Harness (SKU 640115? 640122?)

BD harnesses for wiring your S1, S2, or Squadron lights. These harnesses have 2x 2-terminal weather-pack female connectors going to the lights, red and black ring terminals for power, a relay, and a switch. I have 3 new and 1 used.

Also available is a used BD S8 harness with a single 3-terminal weather-pack female connector instead of the 2x 2-terminal connectors. It does not support the backlight function. Includes a switch labeled Grille Light Bar (shown in switch illumination harness photo further below).

Additional photos of each unit available upon request by buyer.

MSRP (S1/S2/Squadron) Harnesses: $29.95
Asking: $15

MSRP (S8 Harness): $29.95
Asking: $15

Spoiler

Sample image of new S1/S2/Squadron Harness

kmorgan3 (Red Side Electric) Switch Illumination Harnesses

Catch and release from another TW member. Never personally installed. Taps into OEM harness to provide power for switch illumination. Fully reversible. One harness for below the head unit (A/T only) and one daisy chain expansion. Read all about them here.

Below the head unit (A/T only) MSRP: $20
Asking: $10 SOLD

Daisy Chain Expansion MSRP: $15
Asking: $7.50 SOLD

Spoiler

TRD Offroad OEM Recovery Hook (PN 5196135080)

Removed after 25k mi. Includes fasteners.

MSRP: $136.34
Asking: $40

Spoiler

================================================================

The following items were removed during bumper replacement (front and rear) from a 2021. Make an offer on any of them, they're going to the dump otherwise. The parts labeled (cut) are shown in case you need fasteners from them. If you're looking for a particular fastener/clip/screw/etc from these parts, leave a post and I'll look for them. Additional photos available upon request.

From front to rear:

• Front license plate holder
• Fog light bezels (tabs intact, individual photo)
• Front bumper with Thanos chin (cut)
• Front lower grill
• Front plastic crash bar
• Front aluminum crash bar
• Front aluminum crash bar standoffs
• Front cross member endcaps (individual photo)
• OEM Left-of-steering wheel switch panel for M/T (tabs intact, individual photo)
• Front wheel well liners (cut)
• Rear wheel well liners and bedside standoffs (cut)
• Rear bumper assembly (No harnesses. Has backup sensor holes, does NOT come with backup sensors)
• License plate lights (Tabs intact. OEM housing, LED bulbs, separate photo)
• Rear bumper caps (Cement. Tabs intact. Have backup sensor holes, do NOT come with backup sensors)

Spoiler

 

Messaged about the BSMs

 

replied - BSM's SOLD