What Have You Done To Your 3rd Gen Today?

Yank off the air dam, and change the grille out, and add some air deflectors too.

 

Want to sell your old grille?

 

Had a OTT tune yesterday. Truck is much more responsive...

 

You cant Buff that out?

 

Have one in perfect condition. Happy to sell it to a TW member for a very good price. Not sure where you’re located though. I'm in the PDX area. Probably not worth shipping costs since you can usually find them locally.

 

The white parts maybe, the black is scraped off paint so it'll likely need fixing.

 

Took the air dam off minutes after this picture. I kinda like the SR5 grill, but the PRO one is growing on me.

 

Install is super easy, check out a quick Youtube video, took me about 20-30 minutes to do both sides. On a side note, when I went to upgrade, I purchased the

$91 DS18 Pro-ST OEM Subaru/Toyota Upgrade Bullet Compression Tweeters with Crossovers 1.9" - Car OEM Tweeter Upgrade Kit for Many Subaru/Toyota Models - Replacement for H631SFJ101 and H631SFJ100 (Pair)

DS18 Pro-ST plug and play tweeters, partially because of a couple comments about their quality and partially because they were cheaper.

Surprisingly, when I popped the covers off to install them, there were already Kickers in there. I switched them out anyway and personally believe the DS-18s are higher quality. The sounds seems louder and more crisp to me. So my recommendation would be to either buy the DS18s or DM me and I will sell you my Kicker ones a bit cheaper than the DS18s.

 

Same experience with DS18s vs Kicker tweeters. Very little difference sound-wise between the OEM and Kickers (to me). Totally PNP.

$91 DS18 PRO-ST OEM Subaru/Toyota Upgrade Bullet Compression Tweeters with Crossovers 1.9" - Car OEM Tweeter Upgrade Kit for Many Subaru/Toyota Models - Replacement for H631SFJ101 and H631SFJ100 (Pair)

DS18 FTW.

 

Installing avs auto vent shades today. What is best practice for removing AVS logo? I heard gasoline, goofooff, wd40?

 

Got my Dobinsons lift fully installed. 1.5" lift in the front and 2" in the rear w/ Icon RXT leaf pack.
Front shocks only took 90 minutes, the hardest part was getting the upper ball joint apart.

Just have to install my steel front bumper this weekend and I have an appointment for an alignment on Monday.

 

I had a plate frame on my first car that read, "I'm not driving fast, I'm flying low!" The popo didn't much care for it, but man those HP gains!

 

That's what she said.

 

I didn't remove my logo, but I had heard that fingernail polish remover works.
With any of the choices, test in a hidden area first. I can imagine that some chemicals could etch into that plastic shade.

 

They weren’t lying about the gasoline dabbed a little on a towel and it wiped off instantaneously

 

This is the way

 

Got my Dirt King alignment gusset and LCA installed last Monday.

 

I used a little acetone on mine.

 

Had a Diver cover but it covered the Combat Infantry badge.

 

The teal really pops in the sun. These are the only pics y'all are getting until installation. (I need to find a competent welder/fabricator for the CMC)



@ClassyTacos