1st Gen Lunchtable Thread - General Discussion

Seeing even the slightest improvement was good to see; it sucks cause I keep asking myself "how much longer...?" But really, any progress is better than none at all.

Got to catch up though with my friend and his wife and get lots of love from their 4 dogs.

 

I'm home now and Bronx and Biscuit cannot stop sniffing me

 

https://www.instagram.com/reel/Cq454BKoRNd/?igshid=YmMyMTA2M2Y=

 

Gm and LFG it's Saturday

https://music.youtube.com/watch?v=HHlCOILiKbI&feature=share

 

Waiting in line for a free dental clinic and they are handing out doughnuts, granola bars, and popcorn

Free check up with one free extraction or one free filling, ya bois getting holes in head today

 

Oof

https://www.instagram.com/reel/CrZX8fVgpNP/?igshid=NTc4MTIwNjQ2YQ==

 

Ouch indeed

 

Absolutely amazing. I HATE dentists but that was smooth and efficient. Fuckers were even able to pull it without breaking it nor having to cut me open.


Some crazy decay on this bish

Spoiler: GROSS

 

They make these things called toothbrushes that work pretty good to prevent that. You oughta try one sometime.

 

maybe the LT should pool together to provide basic personal hygiene kits


Glad u got it taken care of tho

 

I brush regularly, I've just got some weak ass teeth. Fluoride in the water is a good thing, and I didn't have it as a child or teenager

 

Debating on what to do about my transmission cooling situation now. Currently running a Koyorad aluminum rad with no provisions for transmission lines. I have a thermostat to allow the trans to warm up before flowing through the

$56 Hayden 678 Universal Rapid-Cool 9.5” x 11” Add-On Transmission Cooler – Not for Direct Replacement of the OE Cooler

Hayden 678. My winch was hitting the Hayden 678 so I'm going to have to shift it upwards and cut the grille a bit. I have a B&M 70264 sitting on the shelf but it's apparently worse than the Hayden, even though it's much thicker.

I could switch to a radiator that has provisions for transmission lines and run the Hayden with it. Or go larger than the Hayden, which likely won't be possible due to how small our trucks are.

 

Wtf I have to pay for dental insurance and I don't get free donuts

Got free donuts this AM though at the nursery school carnival setup, gonna be a crazy day

 

Is like one of those things where dental students do the dental work for practice? I should have used one of those when I had no dental coverage and didn't see a dentist for 10 years lol. Luckily when I finally went all I needed was a deep cleaning

 

Oof. I'd rather have teeth pulled than be a chaperone at a nursery school carnival day, gods speed man

 

Nope, it's a promotional thing where this one group of dentist offices bring all their doctors from all the locations to a single location and give 1 free extraction or 1 free filling for anyone in need. They've been doing it every year for the past 6yrs on only 1 day a year. First come first serve, I was in line before 630 and their were 19 people in front of me. By the time they opened the doors at 8am I heard one of the coordinators say they had 80 people lined up, more were still piling into the parking lot.

 

Way easier with two people; found where it was sucking in air.

Land Cruiser bled and all good to go.

But again, I keep thinking about a regular cab build

 

If it were me, I'd run the larger of the two.

Monitor temps and drive as normal.

Then go from there.

 

Then again a new radiator is only like $120 so really that'd be my real suggestion, and run a cooler after the radiator

Perchance