What Have You Done To Your 2nd Gen Tacoma Today?

icon rxt leaf pack is almost done being installed, not as bad as I thought it would be

 

Got 3 new tires. Went with Cooper ST Maxx again because the last set was fantastic and lasted me ~80k miles. Got 5 last time so only need 3 now. They sure got pricier - like everything else these days I guess

 

Yep. I really don’t tow anything ever, so tucking it way up out of the way is the best option I think.

The OG 7 pin was damaged like they all are, so I took that as an excuse to upgrade it to a 7/4 pin combo.

 

threw in some 5160s I got for free that weren’t blown, should hold me over until I can get some king 2.5 EXT shocks.
After today everything will have been replaced and have less than 50 miles on it. After 235k miles of jumping and being a monster it should be nice to drive again

 

kb voodoo tops installed. i'm on a roll! more to come still...

they are still not shipping enough foam tape with this product, had to use some of my own. lmao. what a stupid thing to go cheap on.

and yeah the powdercoat looks pretty thin. fully expecting to paint these things within a year.

otherwise shape, fit, finish is really good. protip: sit your ass down on the tailgate top to get it to mount properly.

 

Any chance you have a link to the 7/4 harness?
Did it come with a bracket, or did you make it?

 

$54 Hopkins Towing Solutions 41144 Vehicle Wiring Kit

https://www.amazon.com/gp/aw/d/B00YJGC6C6?ref=ppx_pop_mob_b_asin_title

$12 Hopkins 40978 Wiring Kit

https://www.amazon.com/gp/aw/d/B0049MF0W8?ref=ppx_pop_mob_b_asin_title

you’ll have to splice or re-pin the OEM harness.

 

New clear bra.

Before -



After -





Started fuckin around with the new OBA set up.





Adding a quick connect up front and at the back bumper to go along with the one in the bed.

 

Installed a 7-pin trailer plug. Next up, bake controller.

 

pelican bx135 installed with cross-bed mounts. it's quite nice.

 

What is this part number/ name, I have exactly same issue, thanks

 

Coming home today I found the lower catalytic converter heat shield in the middle of my 2600 ft driveway, must have come off when I left earlier and then lost the upper somewhere down the road... Oh well, one less part to rust and rattle.

 

Updating the interior, added a few of KFLo's items, the overhead works very well and gives a lot of flexibility for mounting items. Dash mount rail was perfect for my mounting my Garmin Overland GPS.

 

I put the brake controller to work by pulling my new InTech Explore home.

 

$37 65671-04050

65671-04050 Pretty sure this is it. I ordered one from Amazon a couple of years ago. Perfect fit with no issues. Make sure you soak it with some kind of lubricant for a day or two. Those bolts can get plenty rusted under there!

 

Niceeee!!

 

Tweaker on a tractor decided to run over my ARB bumper yesterday while I was at the landscape supply yard.... so now im shopping for a replacement housing...

 

after 2 years of sitting, I replaced every piece of the suspension, turned my rear bumper into a high clearance bumper, regeared + lockers, new roof rack, found a used bumper from pelfreybilt. Spent days installing, welding, and cleaning.

last night less than an hour after getting insurance on it.. car crash with a motorcycle.

 

That sucks. Hope everyone was ok.

 

Dang man…was everyone ok?
Was there substantial damage to your truck?