08 Tacoma Inverted axle angle?

Nah dude, you’re good. It’s just happen that on Friday we get crazy scenarios and yours is crazy as fuck. Your lift is a shit show and I am sorry that the shop that touch your truck it’s just making a mess. Don’t accept anything but a full repair of everything. Cheers bro!

 

I wish. Insurance came back to me and claimed I put on the wrong struts and left it at that.

 

It is all good. You are fine posting here.
But I do believe something is not right.
I see no reason to design a lift that puts the axles at that angle.
You could get another 1-2 inches with those angles.

 

Yeah my thoughts exactly and it wasn't like that before when I purchased the truck it was almost straight/slightly angled up not down lol. After reading a couple replys I'm thinking maybe the spindle on the drivers side is bent possibly. I thought the frame but every garage says it is fine.

 

My dad sent me these pics as my truck is at his house as I parked it after a 4x4 run. He forgot to send the upper control arm pics but I'll try to get them. Tryna get this all done before nightshift starts haha.

 

Here is driver side control arm

 

Passenger side control arm upper

 

so you are saying that the front is lower after the accident?

if so, it can be only a couple of things.

spacer is diffrent
knuckles are diffrent
spring is diffrent
something is very bent.

 

Kinda looks like driver side shock is bent

 

I've finally figured it out! Canadian tire mustve sold me the wrong struts or Monroe packaged them incorrectly. They were lifetime warranty and I brought them back they had another set in stock and they look the same but what I noticed is the coil has 11 rings on the new ones and the old ones had 8. I installed them and boom axle angle is straight. Also I am aware the right side strut is sitting a 1/4" lower I guess the guy who owned it before me broke the bolt and shoved a smaller one in. Tomorrow I'll be ordering 2 original ones from Toyota to fix that.