What poundage for leer cab rear window struts

I need to replace the shock struts that hold up the back window on my leer cab. I can't read the print, so any suggestion what size and poundage should I get to replace them?
Thank you

 

About a year ago, I replaced my 11/2014 100XR rear window shocks with "Suspa C-16-14195" which matched the originals.



Stats from: https://www.liftsupportsdepot.com/suspa-c16-14195-gas-charged-lift-support/

• Extended Length A [in]: 16.06
• Stroke C [in]: 6.3
• Compressed Length B [in]: 9.76
• Force (Lbs): 35
• Force Newtons: 156
• Shaft Connection: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
• Body Connection: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
• Rod Diameter (MM): 6
• Cylinder Diameter (MM): 15
• SKU: C16-14195-W
• A Interchanges: C1614195, C16-14195, C1633295, C16-33295

 

There were what were on my 100XR. I replaced them with the same ones.

 

These are what I ordered back in 2018 and they are still going strong. I opted for the stronger ones over the replacement force ones b/c they always seem to wear quickly with the weaker shock and the window doesn't seem to want to open all the way up.
Leer 100xr also.

$27 Suspa C16-09209 C1609209, 16" Gas Prop, Quantity (2), Force 38 Lbs Per Prop, Force Per Set 76 Lbs, Camper Rear Window, Tonneau Cover Lift Supports, Window Lift Support, Made in USA

https://www.amazon.com/gp/product/B00774U6HY?ie=UTF8

 

I just took one off. Took it into Autozone and found some the same length. I have no idea what the part number is. They ended up being a little heavier than factory, but that doesn't hurt anything. I don't remember the exact price, but the total for 2 was less than $40.