Removal of lower spring seat on bilstein 4600

I ordered some pre assembled 4600 coil overs and I don’t think they are clocked correctly . I am able to install the passenger side with the end of the coil towards the rear but on the drivers side there is no way to turn it to get the end of the coil to the rear. Looks like they were both set up for passenger side. If I disassemble one of them can I remove the bottom seat and turn it to the correct position so the end of the coil is at the rear? Something has to be turned to make it right . Any help would be appreciated .

 

Turn the top hat to the correct orientation