Bolts!

Just got the new wheels and tires on I wanted.....they rub in the front of course! People have told me to just cut the inside of the wheel well but I really don't want to cut anything!

I looked and where the front tires are rubbing a little bit and its where the bumper bolts on. Any one have any suggestions other than cutting things or has anyone tried relocating the bolt?

 

Yeah, get rid of the big ass tires. Problem solved.

 

Any other info, wheel and tire info would be helpful. Any lift? This thread would better be served in the wheels and tire forum.

 

Thank you I posted in the wheels and tires forum. 2" lift tires are Wild Peak AT 275/70 R18

 

You need to go to YouTube and search "Tinkerer's Adventure"

 

Alignment might help but other wise

 

the bolt is right where the tires rub. If I cut it......and thats like worse case scenario, I still think the bumper would need to bolted on that side somewhere.

The tires rub all the time and I'm going out to the woods this Saturday for the first time with these tires so just don't want to damage anything or have to "be careful" when I'm out there

 

Take the bolt out, push the liner forward and through a zip tie through one of the other holes. I had to do the same

 

Thank you, does that fix hold up well with going off road? I will try it out, sure beats cutting

 

Yeah I ran it for about 10k miles on and off-road. Works great

 

I'm running this tire size on a Nightshade wheel with no rubbing at all. A good UCA and proper alignment will get that tire right where it needs to be without rubbing.