What Have You Done To Your 3rd Gen Today?

Great job! How long did it take you to do this?

 

Did the viper cut yesterday after long procrastination. Definitely worth it, looks more aggressive

 

They are very good quality. Just make sure you put some anti seize on the bolts for the oil change panel on the engine skid….ask me how I know The sliders are very solid, very impressed with them so far.

 

Got it all shined up and the ton of pollen that was covering it. Tomorrow is a local truck show. Might swing by for a bit.

 

You happen to have the part number ??

 

That's where I'm at. I'll report back when I get the new bumps.

 

see above

 

Stock suspension otherwise?

 

Think I can finally start getting my patch collection back in my truck. Really don't want to have a ton of hook velcro left over when I just need the loop side.

 

yup i saw your post too late. sorry

 

Did you need anything else other than the shocks? I'm looking to do the same, but beyond the Bilsteins, I dunno what else is needed.

 

Going to add these to the post for everyone lol.

64742-04010 Pocket Box
64074-04011 Cover
90148-A0006 (x6) Bolts

The OEM bolts are M6 thread pitch and use a t25 torx.

Thank you. It was not bad to install at all, an hour maybe after making a cutting template (the template took the longest). I started with a step bit in the corners to round them to reduce the chance of cracks and my Dremel with a plastic cutoff wheel went right thru the composite bed. After that I used the flap disk on the grinder to slowly creep up on the perfect fitment.

 

I must re-evaluate the term "proper".

 

$200.00

 

Made up a DIY on board air setup. Ill probably update it with a better display and some color graphics. Maybe touchscreen and add some other features and stuff. Fun to tinker with stuff like this.

A not very good video showing it...

https://youtu.be/fAaDA49FvAU

 

Price is right rules for guessing?
$124.99

 

Yeah the body line at the bottom and just kept going in an angle towards the rear. What took the longest was the measuring and to make sure both sides are even. Then used a dremel. Not hard at all lol just take your time

 

Measure for 3 days, cut once.

 

Exactly

 

Nothing else.