The blower stopped working on my 2015

Hi, the blower stopped working in my tacoma 1st problem iv had with this truck love it. I'm thinking a fuse but not 100% on that or where it is located. Resister would be my next thought. Iv worked on cars changed oil ,basic stuff as well as dropping motor ( as a girl dad wanted me to learn). But wiring or electric not my cup of tea. Any help?

 

Hello Cheryl,
Welcome to TW.

Does it work on High speed?
If you really want to figure it out, see the link below.

https://www.tacomaworld.com/threads/2nd-gen-information-diagnostics.784008/#post-28042158

 

Does it blow on high? If so, resistor...and get the new style, like this: https://parts.elmhursttoyota.com/p-...nector-87138-04070-82141-04q80-tacoblwrresist
theyre sqaure and not the flat kind you have. Fairly easy to remove and replace. If you go this route, let me know as I have the wiring diagram to match up the colors of wires as they arent the same! and Welcome!!

GAHH...I just read @TnShooter post...sorry for the duplication...

 

Thank you. It was working on high then today stopped but awhile ago it was working again. I'm thinking it may be wire I haven't had time to dig into it yet.

 

When it's not working give the blower motor a good tap, if it takes off again it's most likely the blower motor and/or blower motor connector.

 

No real digging required reach down under pass side dash in the foot well (where your shoe toe hits) and you will see the connector - pull off and look and probably all burned.
Connector first, then resistor, then blower motor assuming the fuse is good. I used the Dorman connector and that fixed it never needed the resistor.
Amazon sells it #973-582 HVAC blower motor resistor kit $20.