Switches setup help

So I need some suggestions, got some stuff I am trying to add to the truck soon; got a prinsu with a cutout sitting, I have a amber cali raised 42’ Cali raised light bar for the roof rack arriving today if it hasn’t been delivered already, I also got some ditch lights also sitting but this is the situation. Looking at my available slots I only have 1 due to the fact I already have a 32’ light bar underneath my bumper. So do I buy a switch like an 6 gang and be set, use a cali raised 3 switch oem panel that I have or what should I do? Don’t really see myself adding any more things as of now, but yeah any ideas would be appreciated.
Just for reference I attached the link for the 3 switch panel and also a picture of my switches now.


https://caliraisedled.com/products/2016-2020-toyota-tacoma-oem-style-switch-panel

 

Try this…
https://www.etsy.com/market/tacoma_3rd_gen?ref=cq_tag_bottom_text-2

Several options for panels listed there.

 

Others will chime in. Option are Garmin, Auxbeam, switch pro, Blue Sea, Trigger and SPod. If you just want to run it off your phone, Garmin. I’m running a Spod and like it so far. With these you are running one cable into your cab instead of one for each switch you are adding. Or in the case of the Garmin you use your phone to control and don’t run any cables into your cab. Lots of threads on here about all options.