Removing factory water catch can and resonator

I have a 96 2.4 auto and want to remove water catch can and resonator. What easy options are there? Do i just cut them out and plug the holes, and if so, where do i reattach the vacuum lines to the fuel pressure valve?

 

I guess no one has any thoughts

 

You'll probably get a better response in the 1st Gen. Tacomas (1995-2004) subforum

 

You can plug the first one with a oatley plumbing pipe plug. I’d recommend just replacing the whole resonator with a 2.5in I’d pipe. Easy to fab and only need 1 45 degree elbow. Or just keep the first rubber boot from intake box and get a straight 2.5in I’d pipe and replace the second resonant or and just plug the first one