Any woodworkers?

The ones in the pic above from Amazon are decent. Two for about $16 but the bonus are all the mounting options for t slots as well

 

Great thanks

 

I have this set. They are very helpful and accurate.
https://www.woodcraft.com/products/groz-precision-engineers-square-3-piece-set

 

x2. Have a set of these, the saws and jointer fence need a checkin’ every so often.

 

Price went up a bit:

SUNLFPROD Upgrade Featherboard Safety Device Stackable Feather board for Most Standard 3/4", 3/8" Miter Slots, Miter Track, T-Slots, T-Track on Table saws, Router Tables & Band Saw

https://www.amazon.com/dp/B0B8Z8WCMC

I also have this, but would need adapting. :

$35 The Hedgehog Featherboard for Table Saws for Quicker, Easier, and Safer Workflow | Improve your accuracy and precision

https://www.amazon.com/dp/B078L82HLT

 

Nice! I've been thinking of making a few of these for years for my coworkers as christmas gifts. We have tons of expired tubes that cannot be used, so I've been meaning to take a couple tubes home to get some plans made up for easy duplication. I had planned to just stick some fake plants/fake sand or soil/etc in them since they'd just be office desk decorations, but never got around to finding cheap fake plants that would work well with them.

 

I use plastic protractor set. I got a 3 pack from hobby lobby.

 

Too wiggly and wear. But cheap and usually around 45°, 90° as marked. Tough to butt up, though. Thanks

 

I would be more worried about the off cuts being trapped between the blade and the feather board.

 

Exactly. None of would work out and if some idiot reached before blade stopped

He appears to be freehand crosscutting, using the feather board as a flexi fence, etc

 

Idk, it looks totally safe to me, the blade is not spinning. If it was spinning, all bets are off!

 

What is more expensive ... a cord of axe-split common pine or a badly-built desk of select hard-maple?

 

Well that's a good point. You can do a lot with the tablesaw with it unplugged! I use mine to stack shit.

 

Both will warm you up inside.

 

I was asked to post a few of my projects here.
Burning a pic of my SIL's house for her to hand on the wall.
Need both of these...
Had to make my own rolling seat. 5" casters...
Carving 13 bowls. Notice the Death Wheel on the grinder. I just finished carving the last one and still have all my fingers.
The first bowl I did as a prototype with the blanks underneath. One of many cedar logs I shape into side tables big enough to hold a plate and drink.

This is what I have done in the past few months. My family and friends just ask and I create.

 

Awesome stuff dude!

 

Three frames cut out and glued up today.

 

Nice!