Can I fit 275/70/R17 on my Tacoma

Hello,
I got a 21 TRD OR with a TRD leveling kit. Looking to get new tires.
I currently have 265/70/R17 with Pro wheels. I was wondering if I can shove some 275/70/R17 tires and still have clearance with no rubbing.

 

I believe @Dream Weaver has that set-up (you're looking for) with SEMA wheels and no rubbing except under slow turning when steering is completely flexed.

The UCA showed slight evidence of rub but Collin explained it's under slow speeds.

Also...his Sport does not have a lift and it's a Blazing Blue beauty!

 

I run 285s on the 4R sema wheels and no where close to the UCA and I did not have to do a CMC either. I have it lifted on 5100s 2in front and a 1 in rear block and I still have the factory mud guards. A good alignment is the key

 

I Have them on 22 Trail Edition . Only rub on mud guard at full lock

 

You can, they will slight rub on the very outside of the tread in the oddest of places. No worries, hard wheeling they are just fins. Seems like they only catch the plastic part on the inner fender well while crawling the mall etc. I still can't really figure it out but I have about 60,000 miles on the setup and that is my report.

 

275/70/R17s
4Runner Pro Rims
TRD Lift

0 rub at all

 

can confirm, small rubbing in reverse at full lock or steep inclines at full lock. other than that no worries! (falken wildpeak at3w 275/70/17 on 4runner pro wheels, stock sport suspension)

 

only slight rub on the UCA and wheel well

 

We've been installing 275's on all our TRD showroom lifts with Sema rims. No lift.

You have to max the caster, thats all.

 

I recently bought new tires and was also debating on the 265 70 17 and decide to stay with the original 265 65 17 just for the reason of rubbing.

 

Thank you. Just changed out the door emblems for some OEM black emblems.

 

Only trouble is 275 selection is limited.