P2714 presser control solenoid stick off (what solenoid is that or if not how do I fix it)

this is my first post so I don’t really know a whole lot about this but my truck is a 2007 5 speed automatic 4wheel drive v6 I ran it low on transmission oil cause of a leak I have since fixed it but now my truck dosnt like to shift and sometime shifts hard. I changed the transmission oil and filled it up correctly there was no metal in my pan a little on the magnets but it still dose it. I don’t know what part to get to fix it I need help.

 

Are you sure the code wasn’t a 2714?
I don’t see any code data for a 2174?

 

Ya it is 2714
And my truck is still shifting hard when coming out of overdrive into 4 and if I step on the gas it sometimes will shift hard going into overdrive from 4 I’m at a loss wondering if you could help

 

I'm not a transmission guy but best guess is the SLT (Transmission Line Pressure Control) Solenoid or something in the valve body is sticking.
@gearcruncher may have some ideas, meanwhile I attached the chart for the code.

 

He can do some reading hehehe . Then we can help him
https://www.tacomaworld.com/threads...th-pics-for-second-gen-4-liter-trucks.289913/

 

I read it all and I leaning towards a wiring problem or the SLT solenoid or wiring problem

 

Well I changed the solenoid and it didn’t fix it

 

What was the resistance ?