Arb Twin & Slee Mount

The air filter cover on the compressor is rubbing against the latch to the intake. It’s up against it so much I can’t get the filter cover to seat. I bought the mount used thinking it would fit a 2022. Website says 2016-2021. Did something change?

 

Isn't there different mounting holes for the ARB to choose from. Mine isn't even close with the same setup

 

There is - It's currently seated on the mounting holes closest to the engine.

 

Hmmm... My stuff is almost 1-1/2 years old, maybe something did change. From the picture it looks like the compressor is in about the same spot as mine though.

 

Here's a measurement for reference, about 5" from the plastic trim on fender to center of bolt above the filter on ARB

 

Thanks! I’ll measure when I get home. I’ll have to pull it back out and make sure it’s on the furthest holes as well. I double checked but it was late last night!

 

That’s normal. Pop then over off the air intake filter box, seat the Arb filter housing, replace the lid.