Amazon Prime Day Deals? Anyone seen any?

Anyone seen any good Amazon Prime Day deals? Looking for any cheap accessories or anything bigger mods that are a good deal. Feel free to post them.

 

Deals & Coupons | Tacoma World

Amazon Prime Day July 11 & 12, 2023-Post Up Those Deals! | Tacoma World

 

I ordered 15 Mach3 razor blades for $17 with tax, I feel great about it.

 

Nice. Ya. I got a great deal on a sonic electric toothbrush. normally 110 now 60
Deal of the day for Prime Members: Philips Sonicare ProtectiveClean 5300 Rechargeable Electric Power Toothbrush, Black, HX6423/34

$110 Philips Sonicare ProtectiveClean 5300 Rechargeable Electric Power Toothbrush, Black, HX6423/34

https://www.amazon.com/dp/B084TM4XKG

 

Yes, for the shop outback...

Wall mounted plastic urinal. Just plumb into a downspout.

Düvkori® Plastic Urinals For Men,Gray,Urinals For Men,Urinal,Male Urinal,Urinals,Outdoor Toilet,Mens Urinal,Urinal For Men,Waterless Urinal,Urine Diverter,Urinals For Men Bathroom,Urinals Large

https://www.amazon.com/Düvkori®-Pla...1&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY

 

Faux Bed Step for $71.99

$80 ASOPARTS Rear Bed Step Tailgate Bedstep Compatible with Toyota Tacoma 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 Folding Truck Step Retractable Bumper Tailgate Step # PT392-35100

https://www.amazon.com/dp/B0B9GD8879

I actually bought it cause my OEM step broke at the part where it mounts to the frame. Will replace the broken part with the faux upper half, then everything else from the hinge down is OEM.

 

I bought some bluetooth speakers for my bug @ 60% off.

BTW-- this is the wrong category for the topic.

 

Some good discounts I saw were Tekton torque wrenches, Jackery's, pressure washers, and Meguiars/Chemical Guys products.

 

Dang thats not bad. OEM is like 150-250 *cries*

 

Sticker installation sounds like it is for people that like to live dangerously

 

How did this work out? I bought one - it is going back. One of the threads for a bolt that attaches the arm to the main body stripped well below the torque spec. Not the quality it needs to be. It was not well packed either. The box showed exterior damage, but the contents arrived undamaged. In any case, I'm not happy with what arrived.

 

Mine arrived just fine, packaging was double boxed, so there was zero damage. I compared it to my OEM part, and other than it being painted vs powder coated, it was identical. The weight between them is off by an ounce or 2. The spring is also a little different, the faux step being louder when moving between positions.

For the install, i used the upper part from the faux step and the lower part is OEM. I used OEM hardware too, so I had no issue. Was it the bolt itself that failed or the hole it threads into?

So far so good. But my OEM broke after 4 years, so time will tell if it will last.

 

It was double-boxed, although the outside box was more of a shell that was open at the top ends. The step was already mounted to the hinge, and had moved quite a bit in shipment, damaging the inner box. The step itself is in pretty good shape.

The mounting bolts are in great shape - definitely not stripped. It is the top of the hinge is where they drilled the mount hole and tapped it where the problem is. Both bolts did not fit quite right, as if the tap was metric and the bolt is SAE. The one towards the left of the step is definitely stripped - at this point the bolt simply turns. There is some threading left, and it took a bit of work to remove the bolt. There is not enough strength to hold the bolt though.

I can't say I am impressed with the workmanship of the step. Proper tapping and better casting of the arm would make it a better product. I'm trying to decide if I want to try a replacement or just get my money back.

 

i got 100 for $7.99. but i use a DE razor. Wilkinson Sword.

 

I shave my scalp, I’m open to trying new blades.

 

Check out this free Amazon price checker site. It will give the price history of an item and can send you alerts.

https://camelcamelcamel.com/

 

I would try for a replacement, then if that fails, go for a refund. I guess the hassle is that you will have to pack and mail it out for the process to go through.

 

Got my Düvkori® installed and added a privacy screen and drink holder. Added a one-gallon gravity fed hose along the side for rinsing.

 

So I just tested out the hardware on the step that I didn't use. The bolts threaded in fine, but I noticed a problem with the little spacer that separates the step to the mount.

The spacing between the holes is just too narrow, just ever so slightly too close to each other. Which would cause one of the bolts to thread in at an angle.

You can move the spacer up the shaft, towards the non-thread part, then thread them in straight. Just tighten them evenly, it should go in without an issue. Or you can widen the holes so it isn't as tight.

 

i returned my shitty germ guardian air purifier that was loud af and not very effective. went with a newer model Winix. I loved my last one but it started to stink after 4 years of constant use even with new filters. My old house was a bit musty and running with candles burning i think contributed to the smell.

this is the model i got:
https://www.winixamerica.com/product/5500-2/

got it for $159.99